RaceFlight Bolt32

In stock
The RaceFlight Bolt32 4in1 provides a high power Blheli_32 esc in a small and easy to install package. When combined with a Revolt, it makes a thin stack, making any builder cleaner and easier. This includes the connector to the FC and 1 capacitor. This does NOT have a 5V regulator and should be used with the RevoltOSD NOT the Revolt v3 or lower.
- +

Four ESCs Built Into One

The RaceFlight Bolt32 4in1 electronic speed controller (ESC) was designed for power and performance. Coupled with the Revolt or RevoltOSD FCs, the Bolt32 makes a thin stack while keeping the escs save inside the frame, protected from prop strikes. The escs are also safe from vibrations thanks to the integrated RaceFlight Gummies.

The RaceFlight Bolt32 4in1 is also extremely easy to install. It is compatible with 4s through 6s batteries and has a built-in current sensor that hooks up directly to the Revolt or RevoltOSD to provide amp draw and mAh consumed information. The Bolt32 can pin into the revolt and provides the Revolt power.

  • 30.5mm x 30.5mm mounting hole spacing
  • Integrated RaceFlight Gummies
  • 50 amp per channel
  • BlHeli32 and more to come!
  • 5V voltage regulator capable of 3A continuous output
  • D-Shot ready
  • 4s – 6s compatible
  • Built in Current Sensors
  • Special low noise connector integrated with the Revolt and Bolt pair
  • Current and Voltage sent to flight controller
  • Easy Install
  • High-quality components
  • Weight: 15.5 grams

Write Your Own Review

You're reviewing: RaceFlight Bolt32